10.1" IP66/IP69K HMI N2930 4GB DDR3L 32GB SSD Protect Glass

Available in a SUS316 version

In automation and in the food industry, industrial embedded panel PCs are constantly exposed to moisture and dust particles, so it is very important that such embedded industrial systems have an IP66/IP69K resistance. In order to remove dust particles and dirt, it is also important that these types of industrial embedded panel systems are cleaned with heavy industrial cleaning agents. The IP66/69K stainless steel housing of this Aplex industrial embedded panel PC in combination with a hardened hygienic glass screen offers a solution. It is possible to equip the PC with a SUS316 stainless steel frame that is resistant to the most common industrial cleaning agents and also has antibacterial properties. The minimalist design with one touch on/off button and a flat bezel design also makes it possible to optimally clean this PC.

Hygienic glass screen

The glass screen of this 10.1 " industrial embedded panel PC is easy to remove and is also very robust. Ideal for use in automation and the food industry.

Various mounting solutions

The various mounting options ensure that your industrial embedded system can also be used in the most cramped workplaces. For example, a swing arm, floor stand, YOKE mount and a VESA mount can be used.

Surface Coating

The LCD screen of this industrial embedded panel PC is equipped with a surface coating. This coating prevents computer eye strain, reduces light reflection on the screen from 10% to 2% and also blocks UV rays on the screen to protect the LCD.

Always a clear image with auto-dimming

The auto-dimming sensor on the screen automatically adjusts the brightness of the screen to a maximum of 1000 nits based on the light incidence at the relevant workplace.

The advantages of Optical Bonding

It is also possible to equip this VITAM industrial embedded panel PC with Optical Bonding. This extra layer is then placed between the touchscreen screen and the TFT LCD screen. Optical Bonding reduces the reflection of sunlight, makes the image clearer and offers extra protection against dirt and moisture. This also offers extra protection for an already fully-fledged IP69K resistant screen. In addition, the screen is also easy to read at very low temperatures because no condensation can occur.

Secure storage with SSD encryption

This Aplex industrial panel PC can be equipped with an industrial 2.5" SSD hard drive. This increases the responsiveness of the PC with an impressive bootloading and transfer time compared to a PC with a mechanical hard drive. Equipped with 3D NAND Flash, the productivity of the SSD is increased. Because 256-bit AES is used, the SSD has End-to-end data protection and therefore also supports TCG Opal 2.0 security management solutions.

Extra security

The industrial embedded PCs from Aplex have a power range of DC 9~36V, this provides extra flexibility and reliability when the power grid is unstable. Equipped with an industrial embedded motherboard The 4” in-house designed industrial embedded motherboard from Aplex is based on the x86 and the ARM platform. This Aplex industrial panel PC is therefore also equipped with a Baytrail processor, which offers a good balance between energy efficiency and performance. This 4” EPIC motherboard can also be expanded with various I/O cards. These I/O expansion options make this industrial motherboard extremely suitable for industry 4.0 purposes. For example, this industrial panel PC can be equipped with a PoE port, which means that power and data will run via one and the same Ethernet cable. In this way, only one network cable is needed for your system installation instead of multiple connection cables. By using PoE, you are well prepared for the industry 4.0 era and the setup of your own local IIoT infrastructure.

The advantages of the CAN bus module

To realize an analog communication connection between the PC and actuators, controllers or sensors, it is also possible to expand this Aplex VITAM industrial panel PC with a CAN bus module.

RFID Reader for extra security

By adding an RFID reader to the industrial Aplex motherboard, this industrial Aplex panel PC can be provided with additional access control. Users with an RFID device are then only able to gain access to the PC in question.