RUT956 is an industrial router that combines dual-SIM cellular 4G LTE, Wi-Fi, and wired connectivity options and additionally offers GNSS capabilities.
Automatic WAN failover ensures solution uptime even if the primary connection is lost.
Serial communication interfaces enable integrating more varied devices to the solution ecosystem, even legacy equipment.
Digital and analog Inputs/Outputs with advanced RutOS software features facilitate equipment control, automation, and event notifications.
Packed with advanced industrial software features, including Modbus, SNMP, TR-069, NTRIP, MQTT, and multiple VPNs.
Specificaties
Processor
Processor
MIPS 24KEc
Basisfrequentie
580 MHz
Aantal cores
1
Geheugen
Geheugentype
DDR2
Max geheugen
128MB
Belangrijkste eigenschappen
Kenmerken
● CONNECTIVITY 4G/LTE (Cat 4), 3G, 2G
● DUAL SIM For additional connection reliability
● Global Navigation Satellite System for location services and time synchronization
● Multiple digital and analog inputs and outputs for equipment control and event notification
● RS232/RS485 serial communication interfaces
● Compatible with Teltonika Remote Management System
Poorten & Interfaces
Apparaat
Gateways
mobiel netwerk
2G, 3G, 4G (lte) cat4
LAN poorten
4
Seriele poorten
2
USB 2.0 poorten
1
Externe I/O
Lan
1x WAN port (can be configured to LAN) 10/100 Mbps, supports auto MDI/MDIX
3 x LAN ports, 10/100 Mbps, supports auto MDI/MDIX
Serial
1x DB9 connector, full RS232 (with RTS, CTS)
1x RS485 Full Duplex (4 wires) and Half Duplex (2 wires). 300-115200 baud rate
Digital I/O
1x digital dry input (0 - 3 V),
1x digital galvanically isolated input (0 - 30 V),
1x Digital non-isolated input
(on 4 pin power connector, 0 - 5 V detected as logic low, 8 - 30 V detected as logic high)
1x digital open collector output (30 V, 250 mA),
1x SPST relay output (40 V, 4 A),
1x Digital open collector output (30 V, 300 mA, on 4 pin power connector)
USB
1x USB 2.0
Opslag
Opslag Capaciteit
16MB Flash memory
Mechanische specificaties
Type behuizing
IP30
Afmetingen
110 x 50 x 100 mm
Montage
DIN rail (can be mounted on two sides), flat surface placement
