This MPL TX2FX-11 Ethernet media converter converts transmission signals from a twisted-pair 10/100 / 1000Base-TX cable to a 100BaseFX or 1000Base-X fiber optic cable.
The MPL TX2FX-11 extends network data transmission distances beyond the 100-meter limit of copper wire to more than 10 kilometers away, using a single-mode fiber optic cable. For the available fiber optic port, any standard Small Form factor pluggable (SFP) transceiver module can be applied to the TX2FX-11. The MPL SFP 1X, SFP 2X and SFP 3X transceiver modules are available with different transmitter and receiver types, so that users can select the right transceiver for the required fiber optic interface. Furthermore, the MPL TX2FX-11 provides automatic detection and initialization of the MPL SFP module and features easy-to-read diagnostic LEDs for continuous status reports on network speed, traffic and fiber optic port status.
Learn More
The MPL TX2FX-12 is an Ethernet media converter that translates transmission signals from a twisted pair twisted pair 10/100 / 1000Base-TX cable to a 100Base-FX or 1000Base-X fiber optic cable. This industrial media converter from our Swiss partner MPL extends the copper wire signal to 10 km, through the use of a single-mode fiber optic cable.
Any Small Form factor pluggable (SFP) transceiver module can be used for the fiber optic port. MPL supplies SFP-1X, SFP-2X and SFP-3X with a variety of transmitter and receiver types, allowing users to use the suitable SFP modules for their IT projects.
The MPL TX2FX-12 also offers automatic detection and initialization of the applied SFP module and has diagnostic LEDs for continuous status reporting regarding network speed, traffic and fiber optic port status.
Learn More
The MPL TX2FX-13 is an Ethernet media converter that translates transmission signals from a twisted pair 10/100 / 1000Base-TX cable to a 100Base-FX or 1000Base-X fiber optic cable. This media converter offers users a single mode solution of 10 km.
Any standard Small Form factor pluggable (SFP) transceiver module can be used for the fiber optic port. Our Swiss partner MPL supplies SFP modules with different transmitter and receiver types. Compatibility with different SFPs allows adaptability to different fiber types, distances and wavelengths, providing flexibility for a variety of network architectures and topologies.
The MPL TX2FX-13 media converter offers automatic detection and initialization of the SFP module and has diagnostic LEDs that are easy to read. The LEDS provide users with status information regarding the network speed, traffic and the status of the optic port.
Because the MPL TX2FX-13 has 2 copper ports and 1 SFP slot, this media converter can also be used as a switch.
Learn More
Lantech LGS-2624C is a 20-port 10/100/1000 Base-TX + 6 100 /1000M SFP L2 managed switch that
support full SNMP features, such as QoS for 4 queues, 801.q VLAN, IPv6, IGMP snooping and query mode as well as SNTP and SMTP.
This industrial DNV type switch features advanced security functions including SSH, SSL, RADIUS and TACACS+ authentication, PVE, ACLs as well as supports IP Source Guard to anti-fake DHCP server or illegal IP address to access the network.
With advanced SNMP and security functions, the Lantech LGS-2624C is utmost suitable to connect with an IP Camera, Setup box, VoIP phone/router, Wireless Equipment for MTU, Transportation or Surveillance applications.
Lantech DNV-Type Approval LGS-2624C-DNV* model meets with the most critical test criteria in DNV Type test directives consisting of MED (Marine Equipment Directive), EMC (Electromagnetic Compatibility Directive) and LVD (Low Voltage Directive). These directives take the following into account: vibration, high voltage, compass safe distance, salt mist tests and humidity. Test have been conducted to ensure that the Lantech LGS-2624C switch sustains the harsh on-board environments that are often being faced on Ships, Crafts and Offshore platforms. Learn More